Prof. Dr. Dr. Albert Mehl

ZORA Publication List

Publications

• Buhl, J., Mehl, A., & Ender, A. (2025). An in-vitro study on factors influencing the accuracy of current intraoral scanners Scientific Reports, 15, 41049. https://doi.org/10.1038/s41598-025-24904-w
• Buhl, J., Ender, A., & Mehl, A. (2025). Accuracy of current intraoral scanning systems for full-arch impressions: An in vitro study Journal of Dentistry, 161, 105984. https://doi.org/10.1016/j.jdent.2025.105984
• Geiger, B., & Mehl, A. (2024). A novel algorithmic approach for automatic virtual articulation to avoid dynamic interferences in dental restoration designs International Journal of Computerized Dentistry, 27, 179–189. https://doi.org/10.3290/j.ijcd.b4494379
• Mitsiadis, T. A., Pagella, P., Gomes Rodrigues, H., Tsouknidas, A., Ramenzoni, L. L., Radtke, F., Mehl, A., & Viriot, L. (2023). Notch Signaling Pathway in Tooth Shape Variations throughout Evolution Cells, 12, 761. https://doi.org/10.3390/cells12050761
• Zuercher, A. N., Ioannidis, A., Hüsler, J., Mehl, A., Hämmerle, C. H. F., & Thoma, D. S. (2023). Randomized controlled pilot study assessing efficacy, efficiency, and patient-reported outcomes measures of chairside and labside single-tooth restorations Journal of Esthetic and Restorative Dentistry, 35, 74–83. https://doi.org/10.1111/jerd.12909
• Bouattour, Y., Kalberer, N., Chebib, N., Mojon, P., Mehl, A., Srinivasan, M., & Müller, F. (2022). Effects of overnight storage conditions on conventional complete removable prostheses International Journal of Prosthodontics, 35, 730–737. https://doi.org/10.11607/ijp.7158
• Knechtle, N., Wiedemeier, D., Mehl, A., & Ender, A. (2022). Accuracy of digital complete-arch, multi-implant scans made in the edentulous jaw with gingival movement simulation: An in vitro study Journal of Prosthetic Dentistry, 128, 468–478. https://doi.org/10.1016/j.prosdent.2020.12.037
• Morlock, G. E., Ziltener, A., Geyer, S., Tersteegen, J., Mehl, A., Schreiner, T., Kamel, T., & Brümmer, F. (2022). Evidence that Indo-Pacific bottlenose dolphins self-medicate with invertebrates in coral reefs IScience, 25, 104271. https://doi.org/10.1016/j.isci.2022.104271
• Woodford, S. C., Robinson, D. L., Edelmann, C., Mehl, A., Röhrle, O., Vee Sin Lee, P., & Ackland, D. C. (2021). Low-Profile Electromagnetic Field Sensors in the Measurement and Modelling of Three-Dimensional Jaw Kinematics and Occlusal Loading Annals of Biomedical Engineering, 49, 1561–1571. https://doi.org/10.1007/s10439-020-02688-6
• Stromeyer, S. K. R., Wiedemeier, D., Mehl, A., & Ender, A. (2021). Time Efficiency of Digitally and Conventionally Produced Single-Unit Restorations Dentistry Journal, 9, 62. https://doi.org/10.3390/dj9060062
• Woodford, S. C., Robinson, D. L., Mehl, A., Lee, P. V. S., & Ackland, D. C. (2020). Measurement of normal and pathological mandibular and temporomandibular joint kinematics: A systematic review Journal of Biomechanics, 111, 109994. https://doi.org/10.1016/j.jbiomech.2020.109994
• Bencun, M., Ender, A., Wiedemeier, D. B., & Mehl, A. (2020). Fracture Load of CAD/CAM Feldspathic Crowns Influenced by Abutment Material Materials, 13, 3407. https://doi.org/10.3390/ma13153407
• Mehl, A. (2020). Is it possible to detect a true rotation axis of the temporomandibular joint with common pantographic methods? A fundamental kinematic analysis Computer Methods in Biomechanics and Biomedical Engineering, 23, 445–455. https://doi.org/10.1080/10255842.2020.1724975
• Zimmermann, M., Ender, A., & Mehl, A. (2020). Influence of CAD/CAM Fabrication and Sintering Procedures on the Fracture Load of Full-Contour Monolithic Zirconia Crowns as a Function of Material Thickness Operative Dentistry, 45, 219–226. https://doi.org/10.2341/19-086-L
• Zimmermann, M., Ender, A., & Mehl, A. (2020). Local accuracy of actual intraoral scanning systems for single-tooth preparations in vitro Journal of the American Dental Association, 151, 127–135. https://doi.org/10.1016/j.adaj.2019.10.022
• Zimmermann, M., Ender, A., Attin, T., & Mehl, A. (2020). Fracture load of three-unit full-contour fixed dental prostheses fabricated with subtractive and additive CAD/CAM technology Clinical Oral Investigations, 24, 1035–1042. https://doi.org/10.1007/s00784-019-03000-0
• Mehl, A. (2020). Digital technologies for functional diagnosis and treatment Journal of Craniomandibular Function, 115–132.
• Mehl, A. (2020). Review and outlook International Journal of Computerized Dentistry, 23, 5–6.
• Zimmermann, M., Ender, A., Egli, G., Özcan, M., & Mehl, A. (2019). Fracture load of CAD/CAM-fabricated and 3D-printed composite crowns as a function of material thickness Clinical Oral Investigations, 23, 2777–2784. https://doi.org/10.1007/s00784-018-2717-2
• Kalberer, N., Mehl, A., Schimmel, M., Müller, F., & Srinivasan, M. (2019). CAD-CAM milled versus rapidly prototyped (3D-printed) complete dentures: An in vitro evaluation of trueness Journal of Prosthetic Dentistry, 121, 637–643. https://doi.org/10.1016/j.prosdent.2018.09.001
• Zimmermann, M., Valcanaia, A., Neiva, G., Mehl, A., & Fasbinder, D. (2019). Three-Dimensional Digital Evaluation of the Fit of Endocrowns Fabricated from Different CAD/CAM Materials Journal of Prosthodontics, 28, e504–e509. https://doi.org/10.1111/jopr.12770
• Zimmermann, M., Mörmann, W., Mehl, A., & Hickel, R. (2019). Teaching dental undergraduate students restorative CAD/CAM technology: evaluation of a new concept International Journal of Computerized Dentistry, 22, 263–271.
• Ender, A., Zimmermann, M., & Mehl, A. (2019). Accuracy of complete- and partial-arch impressions of actual intraoral scanning systems in vitro International Journal of Computerized Dentistry, 22, 11–19.
• Zimmermann, M., Ender, A., Attin, T., & Mehl, A. (2018). Accuracy of Buccal Scan Procedures for the Registration of Habitual Intercuspation Operative Dentistry, 43, 573–580. https://doi.org/10.2341/17-272-c
• Zimmermann, M., Koller, C., Reymus, M., Mehl, A., & Hickel, R. (2018). Clinical evaluation of indirect particle-filled composite resin CAD/CAM partial crowns after 24 months Journal of Prosthodontics, 27, 694–699. https://doi.org/10.1111/jopr.12582
• Zimmermann, M., Valcanaia, A., Neiva, G., Mehl, A., & Fasbinder, D. (2018). Influence of Different CAM Strategies on the Fit of Partial Crown Restorations: A Digital Three-dimensional Evaluation Operative Dentistry, 43, 530–538. https://doi.org/10.2341/17-130-l
• Mehl, A. (2018). “Simplification-itis” and scientific accuracy. International Journal of Computerized Dentistry, 21, 275–276.
• Mehl, A. (2018). The determination of the terminal hinge axis: a fundamental review and comparison of known and novel methods International Journal of Computerized Dentistry, 21, 201–214.
• Zimmermann, M., & Mehl, A. (2018). Werkstoffkunde in der Zahnmedizin- Moderne Materialien und Technologien In M. Rosentritt, N. Ilie, & U. Lohbauer (Eds.), Werkstoffkunde in der Zahnmedizin : moderne Materialien und Technologien (pp. 425–442). Georg Thieme Verlag. https://doi.org/10.1055/b-005-143308
• Mehl, A. (2018). Hinge axis determination of the temporomandibular joint and its interpretation: what do we really measure? International Journal of Computerized Dentistry, 21, 295–303.
• Zimmermann, M., Valcanaia, A., Neiva, G., Mehl, A., & Fasbinder, D. (2017). Digital evaluation of the fit of zirconia-reinforced lithium silicate crowns with a new three-dimensional approach Quintessence International, 9–15. https://doi.org/10.3290/j.qi.a39402
• Dietrich, C. A., Ender, A., Baumgartner, S., & Mehl, A. (2017). A validation study of reconstructed rapid prototyping models produced by two technologies Angle Orthodontist, 87, 782–787. https://doi.org/10.2319/01091-727.1
• Srinivasan, M., Cantin, Y., Mehl, A., Gjengedal, H., Müller, F., & Schimmel, M. (2017). CAD/CAM milled removable complete dentures: an in vitro evaluation of trueness Clinical Oral Investigations, 21, 2007–2019. https://doi.org/10.1007/s00784-016-1989-7
• Zimmermann, M., Koller, C., Rumetsch, M., Ender, A., & Mehl, A. (2017). Precision of guided scanning procedures for full-arch digital impressions in vivo Journal of Orofacial Orthopedics / Fortschritte Der Kieferorthopädie, 78, 466–471. https://doi.org/10.1007/s00056-017-0103-3
• Zimmermann, M., Koller, C., Mehl, A., & Hickel, R. (2017). Indirect zirconia-reinforced lithium silicate ceramic CAD/CAM restorations: Preliminary clinical results after 12 months Quintessence International, 48, 19–25. https://doi.org/10.3290/j.qi.a37017
• Zimmermann, M., Egli, G. H., Zaruba, M., & Mehl, A. (2017). Influence of material thickness on fractural strength of CAD/CAM fabricated ceramic crowns Dental Materials Journal, 36, 778–783. https://doi.org/10.4012/dmj.2016-296
• Zaruba, M., & Mehl, A. (2017). Chairside systems: a current review International Journal of Computerized Dentistry, 20, 123–149.
• Zimmermann, M., Koller, C., Mehl, A., Kühnisch, J., & Hickel, R. (2017). CAD/CAM-Restaurationen aus hochgefülltem Komposit: erste klinische Ergebnisse nach 12 Monaten Deutsche Zahnärztliche Zeitschrift, 72, 252.
• Mehl, A., Bosch, G., Fischer, C., & Ender, A. (2017). In vivo tooth-color measurement with a new 3D intraoral scanning system in comparison to conventional digital and visual color determination methods International Journal of Computerized Dentistry, 20, 343–361.
• Ender, A., Bienz, S., Mörmann, W., Mehl, A., Attin, T., & Stawarczyk, B. (2016). Marginal adaptation, fracture load and macroscopic failure mode of adhesively luted PMMA-based CAD/CAM inlays Dental Materials, 32, e22–e29. https://doi.org/10.1016/j.dental.2015.11.009
• Rinne, Christoph; Fuchs, Katharina; Muhlack, Juliane; Dörfer, Christof; Mehl, Albert; Nutsua, Marcel; Krause-Kyora, Ben (2016). Niedertiefenbach. Ein Galeriegrab der spätneolithischen Wartberggruppe südwestlich von Niedertiefenbach (Landkreis Limburg-Weilburg, Hessen) Prähistorische Zeitschrift, 91(2):284-316.
• Ender, A., Zimmermann, M., Attin, T., & Mehl, A. (2016). In vivo precision of conventional and digital methods for obtaining quadrant dental impressions Clinical Oral Investigations, 20, 1495–1504. https://doi.org/10.1007/s00784-015-1641-y
• Zimmermann, M., Mehl, A., Mörmann, W. H., & Reich, S. (2016). Intraoralscanner: eine aktuelle Übersicht Kieferorthopädie, 30, 37–53.
• Ender, A., Attin, T., & Mehl, A. (2016). In vivo precision of conventional and digital methods of obtaining complete-arch dental impressions Journal of Prosthetic Dentistry, 115, 313–320. https://doi.org/10.1016/j.prosdent.2015.09.011
• Kurz, M., Attin, T., & Mehl, A. (2015). Influence of material surface on the scanning error of a powder-free 3D measuring system Clinical Oral Investigations, 19, 2035–2043. https://doi.org/10.1007/s00784-015-1440-5
• Grohmann, P., Bindl, A., Hämmerle, C., Mehl, A., & Sailer, I. (2015). Three-unit posterior zirconia-ceramic fixed dental prostheses (FDPs) veneered with layered and milled (CAD-on) veneering ceramics: 1-year follow-up of a randomized controlled clinical trial Quintessence International, 46, 871–880. https://doi.org/10.3290/j.qi.a34701
• Attin, T., Bosch, G., Wegehaupt, F. J., Mehl, A., Wiegand, A., & Blunck, U. (2015). Rekonstruktion erosiver Zahnhartsubstanzdefekte mit Komposit Die Quintessenz, 66, 1055–1069.
• Zimmermann, M., & Mehl, A. (2015). Virtual smile design systems: a current review International Journal of Computerized Dentistry, 18, 303–317.
• Zimmermann, M., Mehl, A., Mörmann, W. H., & Reich, S. (2015). Intraoral scanning systems - a current overview International Journal of Computerized Dentistry, 18, 101–129. https://doi.org/10.1111/clr.12600
• Zimmermann, M., & Mehl, A. C. (2015). Vollkeramik für Einlagefüllungen, Onlays und Seitenzahn-Teilkronen In M. Kern, F. Beuer, & R. Frankenberger (Eds.), Vollkeramik auf einen Blick : Leitfaden zur Indikation, Werkstoffauswahl, Vorbereitung und eingliederung von vollkeramischen Restaurationen (p. n/a). Arbeitsgemeinschaft für Keramik in der Zahnheilkunde e.V.

Pagination

ZORA Publication List

Publications

• Litzenburger, A. P., Hickel, R., Richter, M. J., Mehl, A. C., & Probst, F. A. (2013). Fully automatic CAD design of the occlusal morphology of partial crowns compared to dental technicians’ design. Clinical Oral Investigations, 17, 491–496. https://doi.org/10.1007/s00784-012-0714-4
• Probst, F. A., Litzenburger, A. P., Richter, M. J., & Mehl, A. C. (2012). Similarity measure for quality control of dental CAD/CAM-applications Computers in Biology and Medicine, 42, 1086–1090. https://doi.org/10.1016/j.compbiomed.2012.08.010